Left Continue shopping
Your Order

You have no items in your cart

How to Make Bone Broth in the Instant Pot in About 2 Hours

Real bone broth has always asked for something most of us do not have, which is a whole day. The traditional method is a pot on the back burner that bubbles quietly for 12 to 24 hours while the house fills with a rich, savory smell. It is worth every minute, but it is not a weeknight project. That is where the pressure cooker changes the game. Under pressure, the collagen in the bones, the marrow, and the cartilage break down far faster, and you end up with a broth that is deep, golden, and full-bodied in about two hours of cooking. It tastes like it took all day. Here is exactly how to make bone broth in the Instant Pot, from roasting the bones to straining the finished pot.

Quick answer: To make bone broth in the Instant Pot, roast the bones at 425°F for 30 minutes until deeply browned, then put them in the pot with onion, carrot, celery, garlic, bay leaves, peppercorns, and a splash of apple cider vinegar. Add water to just cover, lock the lid, and cook on high pressure for 120 minutes. Let the pressure release naturally for 30 minutes, then strain and skim the fat.

Also Read: How to Remove the Membrane From Baby Back Ribs the Easy Way

What Is Bone Broth, and How Is It Different From Stock?

Bone broth is made by simmering bones, often with vegetables and herbs, until the bones release their collagen, marrow, and flavor into the water. Stock and broth are close cousins, and the lines between them blur. In general, stock is made from bones and is simmered for a short time for use as a cooking base, while bone broth is simmered much longer to pull every bit of body and flavor from the bones. The result is a richer, deeper liquid that can be sipped from a mug or used in soups, sauces, and gravies. When it cools, a good one turns slightly jellied, a sign that the collagen has done its work.

Why Does the Instant Pot Make Bone Broth So Much Faster?

It comes down to pressure and temperature. A pot of water at a simmer holds at about 212°F, and it takes many hours to break down tough connective tissue. A sealed pressure cooker raises the cooking temperature well above that, which breaks the collagen down far faster. A pot that would need a day on the stove gives you a rich broth in about two hours of pressure cooking. The sealed pot also holds in all of the steam and aroma, so none of the flavor escapes. There is no babysitting, no checking the water level, and no leaving a burner on all day.

Why Do Beef Broth Bones Work So Well?

Our Pasture Raised Beef Broth Bones are a mix of bones rich in marrow and cartilage, which is exactly what makes a broth silky and full-bodied. The marrow adds richness, and the cartilage and connective tissue give the finished broth its body. The bones arrive ready to use, and the method is simple. Roast them until browned, put them in the pot with vegetables, herbs, and seasonings, add water, and cook. Our Bison Broth Bones work the same way, and give a slightly sweeter, deeper flavor.

What Do You Need to Make Bone Broth in the Instant Pot?

The ingredient list is short and simple. You need the broth bones, one large onion cut in quarters with the skin on, two carrots cut in big chunks, two celery stalks, a whole head of garlic cut in half crosswise, two bay leaves, a tablespoon of black peppercorns, and two tablespoons of apple cider vinegar. A few sprigs of fresh thyme or parsley are optional. You also need a sheet pan for roasting, a fine mesh strainer for straining, and a large bowl. Salt is best added at the end, so you can season the finished broth to your taste.

How Do You Make Bone Broth in the Instant Pot Step by Step?

  1. Heat the oven to 425°F and spread the bones on a sheet pan in a single layer.
  2. Roast for 30 minutes, turning once, until the bones are deeply browned and the edges look caramelized.
  3. Add the onion, carrots, and celery to the pan for the last 15 minutes, so they pick up a little color.
  4. Move the bones and vegetables to the Instant Pot. Pour a splash of hot water on the sheet pan, scrape up the browned bits, and add them to the pot.
  5. Add the garlic, bay leaves, peppercorns, and apple cider vinegar.
  6. Pour in enough cold water to just cover the bones, and stay below the maximum fill line on the inner pot.
  7. Lock the lid, set the valve to sealing, and cook on high pressure for 120 minutes.
  8. Let the pressure release naturally for 30 minutes, then turn the valve to venting to release the rest.
  9. Strain the broth through a fine mesh strainer into a large bowl, and discard the bones and vegetables.
  10. If desired, skim the fat from the surface with a wide spoon, then taste and season with salt.

Also Read: How to Cook Lamb Shanks in the Oven or Instant Pot Perfectly

Why Roast the Bones First?

Roasting is where the deep, savory flavor comes from. When the bones brown in the oven, the surface develops rich, toasty, roasted notes that raw bones cannot give. A broth made from unroasted bones still can taste great and offer plenty of health benefits, but a broth made from roasted bones is dark, golden, and full of savory depth. It takes about 30 minutes in the oven and adds a lot of flavor for very little effort. If possible, do not skip it, and do not rush it. Look for bones that are deeply browned, not just warm.

Why Add Apple Cider Vinegar?

A small splash of vinegar helps draw collagen out of the bones, and it adds a faint brightness that balances the richness of the broth. It does not make the broth taste sour. At two tablespoons for a full pot, it disappears into the flavor. If you do not have apple cider vinegar, a squeeze of lemon juice or a splash of white wine vinegar works as well. Add it at the start, with the water and bones, so it has time to work during the long cook.

How Much Water Should You Use?

Enough to just cover the bones, and never above the maximum fill line marked inside the inner pot. A pressure cooker needs room for steam, and overfilling it is a safety problem as well as a quality problem. Too much water also makes a thin, weak broth. If the bones poke above the water, add a little more water until they are just covered, as long as you stay below the line. If the finished broth tastes weak, simmer it on the sauté setting for 20 to 30 minutes with the lid off, which concentrates the flavor.

Why Let the Pressure Release Naturally?

A natural release lets the pot cool and depressurize slowly. That is gentler on the broth, and it avoids a rush of foam and fat splattering out of the valve, which can happen with a quick release on a pot full of bones. It also gives the broth a few more minutes of gentle heat to finish extracting flavor. Thirty minutes is a good target. When the float valve drops, the pot is safe to open. Open the lid away from your face, because the steam is hot.

How Do You Strain and Skim Bone Broth?

Set a fine mesh strainer over a large heatproof bowl and pour the broth through it, lifting the bones out first with tongs. For an extra clear result, line the strainer with a piece of cheesecloth. Let the broth sit for a few minutes, so the fat rises to the top, then skim it off with a wide, shallow spoon. If you want to remove every trace, cool the broth until the fat sets on the surface and lift it off in one piece. Season the broth with salt only after straining, since the flavor concentrates as it sits.

How Does the Instant Pot Compare to Other Methods?

Method Time Best For Result
Instant Pot 120 minutes under pressure, plus 30 minute release Weeknights and busy days Rich, full-bodied broth in an afternoon
Stovetop 12 to 24 hours at a bare simmer A long weekend at home Deep flavor and full body
Slow cooker 12 to 24 hours on low Long, hands-off cooking Smooth, mellow flavor

How Can You Use the Finished Bone Broth?

Sip it warm from a mug with a pinch of salt and a squeeze of lemon. Use it as the base for soups, stews, and chili, where it adds body that boxed broth cannot match. Cook rice, quinoa, or beans in it instead of water. Stir it into pan sauces and gravies, or use it to loosen mashed potatoes. A cup of hot broth with a little ginger, scallions, and a soft egg makes a quick, comforting meal on a cold night.

Also Read: Hot Honey Heritage Pork Chops: The Viral Sweet Heat Recipe

What Are the Most Common Instant Pot Bone Broth Mistakes?

Skipping the Roast

Unroasted bones still make great broth, but roasted is truly even better. Roast until deeply browned.

Filling Past the Maximum Line

The pot needs room for steam. Stay below the maximum fill line.

Using a Quick Release

A fast release can spray foam and fat. Let the pressure drop naturally for 30 minutes.

Salting Too Early

The flavor concentrates as the broth reduces. Salt at the end, after straining.

Pulling the Pot Early

Under 90 minutes, the bones have not given up their collagen. Give it the full 120 minutes.

Troubleshooting: What Went Wrong and How to Fix It

My Broth Is Cloudy

That is usually from a hard boil or a quick release. It is still safe and tasty. Strain through cheesecloth, and use a natural release next time.

My Broth Tastes Bland

It needs more concentration or seasoning. Simmer it on the sauté setting for 20 to 30 minutes, then add salt, a splash of vinegar, and a bay leaf.

My Broth Is Greasy

The fat has not been skimmed. Skim the surface with a wide spoon, or cool the broth until the fat sets and lift it off.

My Broth Tastes Bitter

The vegetables may have been burned in the oven, or the garlic was overcooked. Roast the vegetables only until golden.

My Instant Pot Showed a Burn Warning

Browned bits stuck to the bottom. Scrape the pan clean, add the roasting juices to the water, and make sure there is enough liquid before locking the lid.

Frequently Asked Questions

How long does it take to make bone broth in the Instant Pot?

Cook it on high pressure for 120 minutes, then let the pressure release naturally for 30 minutes. That is about 2 and a half hours in total, plus the time to roast the bones.

Do I need to roast the bones first?

It is not required, but roasting gives a deeper, richer flavor and a darker color. It takes about 30 minutes.

How much water do I put in the Instant Pot for bone broth?

Enough to just cover the bones, and below the maximum fill line on the inner pot.

Why add apple cider vinegar to bone broth?

It helps draw collagen out of the bones. It adds brightness and does not make the broth taste sour.

Can I use beef broth bones and bison bones together?

Yes. They work well together, and the bison adds a slightly sweeter, deeper flavor.

Natural release or quick release for bone broth?

Use natural release for 30 minutes. It is gentler on the broth and avoids foam and splatter.

Where can I buy beef broth bones online?

You can order our Pasture Raised Beef Broth Bones online and have them shipped to your door.

Ready to Make Bone Broth at Home?

If you want to buy beef broth bones online, we make it easy. You can order pasture raised beef online without a trip to a specialty butcher, and it ships right to your door, ready for your next pot of broth. Browse the full Angus beef collection to find the best place to buy beef online for bones, roasts, and steaks. For questions about how to make bone broth in the Instant Pot or where to buy beef broth bones, call us at 800-674-8426.