How to Cook Lamb Shanks in the Oven or Instant Pot Perfectly
A lamb shank is a humble cut that does a remarkable thing in a pot. Raw, it is tough, lean, and wrapped around a long bone, and it looks like it would take a lot of effort to eat. Give it a few hours in a covered pot with wine, garlic, and rosemary, and it turns into something close to a different ingredient. The meat goes soft and silky, it slides off the bone at the touch of a fork, and the liquid around it becomes a deep, glossy sauce. The whole kitchen smells wonderful. The best part is how little work it takes. You sear it, you add liquid, you put the lid on, and then you let time do the rest, either in the oven or, when you are short on hours, in an Instant Pot. Here is exactly how to cook lamb shanks both ways.
Quick answer: To cook lamb shanks in the oven, sear them, then braise them mostly covered in wine, broth, and aromatics in a 325°F oven for 2 and a half to 3 hours, until the meat is fork tender. In an Instant Pot, sear them on the sauté setting and cook on high pressure for 60 minutes with a 20 minute natural release. If the meat is still firm, cook it 10 more minutes. Reduce the sauce and serve it over the shanks.
Also Read: How to Get Rid of Gamey Taste in Elk Without Losing Flavor
What Are Lamb Shanks?
A lamb shank is the lower part of the leg, the section between the knee and the ankle. It is a muscle that does a lot of work, so it is packed with connective tissue and flavor, and it has a bone running through the center. That connective tissue is the reason it needs a long, slow, moist cook. Cooked quickly, it stays chewy. Cooked slowly in liquid, the tissue melts into gelatin, which makes the meat tender and turns the braising liquid into a silky, full-bodied sauce. The bone adds richness too. This is a cut that rewards patience and forgives almost every mistake as long as it stays in liquid.
Why Do New Zealand Lamb Shanks Work So Well for Braising?
Our Lamb Shank is a bone-in, grass-fed and finished New Zealand lamb shank with generous marbling and a meaty texture. It is made for slow cooking, and the method is simple. Sear the shank in a hot pan to build a caramelized crust, then move it to a slow cooker or an ovenproof dish with aromatic vegetables, herbs, and a savory liquid such as broth or wine. Cover it and cook on low heat for several hours, until the meat is tender and succulent. The marbling keeps the meat rich through the long cook, and the bone gives the sauce body and depth.
What Goes Into the Braise?
The base is simple and built from things most kitchens already have. For a full batch, use one chopped onion, two chopped carrots, two chopped celery stalks, six smashed garlic cloves, two tablespoons of tomato paste, one cup of dry red wine, two cups of beef or chicken broth, two sprigs of fresh rosemary, a few sprigs of thyme, and two bay leaves. A strip of lemon peel or a spoonful of anchovy paste adds depth. If you would rather skip the wine, use an extra cup of broth and a splash of red wine vinegar at the end. The liquid should come about two thirds of the way up the shanks, so the meat is mostly submerged.
How Do You Cook Lamb Shanks in the Oven Step by Step?
- Heat the oven to 325°F with a rack in the lower third.
- Pat the shanks very dry and season them generously on all sides with salt and black pepper.
- Heat a heavy, oven-safe pot or Dutch oven over medium-high heat with a little oil, and sear the shanks for 3 to 4 minutes per side, until deeply browned all over, then move them to a plate.
- Lower the heat to medium, add the onion, carrots, and celery, and cook for 6 minutes until softened, then stir in the garlic and tomato paste for 1 minute.
- Pour in the wine and scrape up the browned bits from the bottom of the pot, then simmer for 4 minutes.
- Add the broth, rosemary, thyme, and bay leaves, then nestle the shanks back into the pot so the liquid comes about two thirds of the way up.
- Bring it to a gentle simmer, cover the pot tightly, and move it to the oven.
- Braise for 2 and a half to 3 hours, turning the shanks once halfway through, until the meat is fork tender and pulling away from the bone.
- Let the shanks rest in the covered pot for 15 minutes before serving.
Also Read: Instant Pot vs Crock Pot: A Complete Guide to Grass Fed Meat
How Do You Cook Lamb Shanks in an Instant Pot Step by Step?
- Pat the shanks dry and season them generously with salt and black pepper.
- Set the Instant Pot to sauté on high, add a little oil, and sear the shanks for 3 minutes per side in batches, then move them to a plate.
- Add the onion, carrots, and celery and cook for 4 minutes, then stir in the garlic and tomato paste for 1 minute.
- Pour in the wine and scrape up every browned bit so nothing sticks and triggers a burn warning.
- Add one cup of broth, the rosemary, thyme, and bay leaves, then stand the shanks in the pot, bone side up if they fit.
- Lock the lid, set the valve to sealing, and cook on high pressure for 60 minutes.
- Let the pressure release naturally for 20 minutes, then turn the valve to venting to release the rest.
- Check the meat with a fork. If it still feels firm near the bone, lock the lid again and cook on high pressure for 10 more minutes.
- Lift the shanks out gently, since they will be very tender, and use the sauté setting to simmer the sauce for 10 to 15 minutes until it thickens.
Which Is Better, the Oven or the Instant Pot?
Both give you tender, juicy meat, and the best choice depends on your schedule. The oven builds a deeper, more roasted flavor and lets the sauce reduce slowly as it cooks. The Instant Pot saves hours and keeps the meat very moist. The slow cooker is the most hands-off choice. Here is how they compare.
| Method | Time | Best For | Result |
|---|---|---|---|
| Oven braise | 2 and a half to 3 hours at 325°F | Slow weekend dinners and deep flavor | Rich, roasted flavor and a silky sauce |
| Instant Pot | 60 minutes plus 20 minute release | Busy evenings | Very tender meat with a lighter sauce |
| Slow cooker | 8 hours on low | Hands-off, all-day cooking | Soft meat that slides off the bone |
Why Sear the Shanks First?
Searing builds a deep brown crust, and that crust is full of flavor. It gives the meat a roasted taste and adds richness to the whole pot of liquid. Skipping it leaves the finished dish tasting flatter and paler. Pat the shanks very dry first, because a wet surface steams instead of browning, and sear them one or two at a time so the pot stays hot. It takes about ten minutes, and it is the easiest way to make a big difference in the final flavor. Searing does not seal in juices, which is a common myth. It simply adds taste.
How Much Liquid Do Lamb Shanks Need?
In the oven, the liquid should come about two thirds of the way up the shanks. If the shanks are fully covered, they boil and the sauce stays thin. If there is too little, the tops can dry out. In an Instant Pot, the sealed pot holds in nearly all the moisture, so about one cup of broth plus the wine and the juices from the meat is enough. Extra liquid just waters down the sauce. If the oven braise runs low, add a splash of broth, and keep the lid on tight so the steam stays inside.
How Do You Know the Lamb Shanks Are Done?
Go by feel, not by the clock. The meat should be fork tender and pulling away from the bone, and the bone should wiggle freely. A fork should slide in with no resistance. For a pull-apart texture, the meat reaches about 200°F inside, though you do not need a thermometer to tell. If a fork meets resistance, the connective tissue has not melted yet, so cover the pot and cook it longer. Shanks that are done a little early are still delicious. Shanks that are underdone are tough, so it is better to err on the side of longer.
How Do You Finish the Sauce?
After the shanks come out, skim the fat from the top of the sauce with a wide spoon. Then simmer the sauce in the pot or a wide pan over medium heat for 10 to 15 minutes, until it thickens enough to coat the back of a spoon. Taste it and add salt, pepper, or a squeeze of lemon if it needs brightness. Fish out the herb stems and bay leaves. For a smoother sauce, strain it through a sieve or use an immersion blender for a few seconds. Spoon the sauce over the shanks right before serving.
How Do You Brighten the Dish With a Fresh Topping?
A braise is deep, rich, and savory, and it benefits from something fresh on top. Mix a handful of chopped parsley with the zest of one lemon and one finely minced garlic clove for a quick gremolata, and sprinkle it over the shanks. Chopped fresh mint is another classic partner for lamb. Even a squeeze of lemon juice and a few leaves of fresh herbs will lift the whole plate. It takes two minutes, and it keeps the dish from tasting heavy.
Can You Cook Lamb Shanks in a Slow Cooker?
Yes, and it is one of the easiest ways to do it. Sear the shanks first for the best flavor, then place them in the slow cooker with the vegetables, wine, broth, and herbs, with the liquid covering most of the meat. Cook on low for about 8 hours, until the meat falls off the bone. Keep the lid closed as much as possible, since each peek adds time. When the shanks are done, lift them out and finish the sauce on the stove the same way as in the oven method.
What Should You Serve With Lamb Shanks?
Choose something soft to catch the sauce. Creamy mashed potatoes, soft polenta, and buttered egg noodles are all classic partners. Creamy white beans or a bed of couscous work well too. For something fresh, add roasted green beans, sauteed spinach with garlic, or a crisp salad with a lemon dressing. Put crusty bread on the table, because you will want something to mop up the sauce.
Also Read: How to Cook an Elk Frenched Rib Rack Without Overcooking It
What Are the Most Common Lamb Shank Mistakes?
Skipping the Sear
Without browning, the meat and the sauce taste flat. Take a few minutes to brown every side.
Covering the Shanks Completely in Liquid
The shanks boil and the sauce turns thin. Keep the liquid about two thirds of the way up.
Cooking Them Too Hot or Too Fast
High heat makes shanks tough. Stay at 325°F in the oven, and give the Instant Pot the full time.
Pulling Them Out Too Soon
If a fork meets resistance, the connective tissue has not melted. Cover the pot and keep cooking, or add 10 minutes under pressure.
Skipping the Fat Skim
Extra fat makes the sauce greasy. Spoon it off before you serve.
Troubleshooting: What Went Wrong and How to Fix It
My Lamb Shanks Were Tough
They need more time. Return them to the pot, cover it, and keep cooking until a fork slides in with no resistance. In the Instant Pot, add 10 more minutes on high pressure.
My Sauce Was Too Thin
Lift out the shanks and simmer the sauce in a wide pan for 10 to 15 minutes until it reduces and thickens.
My Sauce Was Too Greasy
Skim the fat with a wide spoon, or pour the sauce into a tall container and remove the fat that rises to the top.
My Instant Pot Showed a Burn Warning
Browned bits were stuck to the bottom. Deglaze well with the wine and scrape the pot clean before you lock the lid.
My Lamb Shanks Fell Apart When I Lifted Them
That means they are very tender. Use a wide spatula or two spoons, and serve them in the sauce.
Frequently Asked Questions
How long does it take to cook lamb shanks in the oven?
Plan on 2 and a half to 3 hours in a 325°F oven, until the meat is fork tender and pulling away from the bone.
How long do you cook lamb shanks in an Instant Pot?
Cook them on high pressure for 60 minutes, then let the pressure release naturally for 20 minutes. If the meat is still firm, cook it 10 more minutes.
Do I need to sear lamb shanks before braising?
It is not required, but it adds a lot of flavor to the meat and the sauce. A few minutes of browning makes a big difference.
Can I cook lamb shanks without wine?
Yes. Use extra broth and add a splash of red wine vinegar at the end for brightness.
How do I know when lamb shanks are done?
They are done when a fork slides in with no resistance and the meat pulls away from the bone easily.
Can I cook lamb shanks in a slow cooker?
Yes. Sear them first, then cook on low for about 8 hours with the liquid covering most of the meat.
Where can I buy lamb shanks online?
You can order our Lamb Shank online and have it shipped to your door.
Ready to Cook Lamb Shanks at Home?
If you want to buy lamb shanks online, we make it easy. You can order New Zealand lamb online without a trip to a specialty butcher, and it ships right to your door, ready for your next slow-cooked dinner. Browse the full lamb collection to find the best place to buy lamb online for shanks, roasts, and racks. For questions about how to cook lamb shanks or where to buy lamb shanks, call us at 800-674-8426.