Left Continue shopping
Your Order

You have no items in your cart

Crispy Roast Potatoes in Beef Tallow for the Holiday Table

Every holiday table has a dish that disappears first, and it is rarely the one that took the most effort. It is the roast potatoes. A great roast potato is a small piece of engineering: a shell so crisp it crackles when you bite it, a center so soft and fluffy it is almost mashed, and a deep savory flavor that makes you reach for one more before the platter even reaches the other end of the table. The secret to that shell is the fat. Butter burns, olive oil turns bitter at high heat, and neither gives you the same glassy crunch. Beef tallow does. It is stable at the temperatures roast potatoes need, it browns beautifully, and it carries a rich, beefy flavor that makes plain potatoes taste like a main course. Here is how to make crispy roast potatoes in beef tallow, with Wagyu Beef Tallow and a few small steps that make all the difference.

Quick answer: To make crispy roast potatoes in beef tallow, peel and cut potatoes into large chunks, parboil them in salted water for 8 to 10 minutes until the edges are soft, and drain well. Shake them in the colander to rough up the surfaces. Toss with salt, and roast in a very hot pan of melted Wagyu beef tallow at 425°F for 40 to 50 minutes, turning once or twice, until deep golden and crisp.

Also Read: How to Grill Elk Steaks So They Stay Juicy and Never Dry Out

Why Is Beef Tallow So Good for Roast Potatoes?

It comes down to heat and flavor. Roast potatoes need a high oven, around 425°F, to build a crisp crust, and many fats cannot take it. Butter contains milk solids that scorch, and some oils smoke or turn acrid. Beef tallow is a stable, high-heat fat, so it stays clean and golden at roasting temperatures, and it coats every surface of the potato evenly. It also has a savory, slightly sweet beef flavor that you taste in every bite. The result is a crust that is thicker, crunchier, and more deeply browned than one made with most oils, and a flavor that needs very little else.

Why Choose Wagyu Beef Tallow?

Our Wagyu Beef Tallow is handcrafted from the fat of traditionally raised Wagyu cattle, carefully rendered over low heat so the pure fat separates from any muscle and connective tissue. It has a high smoke point, which makes it ideal for cooking at high temperatures, and it brings a rich, delicious flavor to everything it touches. It works as a substitute for butter or oil in any recipe, so a few spoonfuls will coat a whole tray of potatoes. It is also excellent for searing steaks and roasting other vegetables, so a jar earns its place in the kitchen all season.

What Are the Best Potatoes for Roasting?

Potato Texture Inside Crust Notes
Russet Light and fluffy Very crisp and craggy The classic choice, with the most crunch
Yukon Gold Creamy and tender Golden and crisp A buttery flavor, and a good all-rounder
Maris Piper or similar floury potato Soft and fluffy Crisp and bubbly The traditional roast potato in Britain
Red potato Firm and waxy Thin, light crust Holds its shape but is less crisp

How Do You Make Crispy Roast Potatoes in Beef Tallow Step by Step?

What You Need:

  • Wagyu Beef Tallow, about 4 tablespoons, plus a little extra for the pan
  • Russet or Yukon Gold potatoes, peeled and cut into large, even chunks
  • Kosher salt, for the cooking water and for finishing
  • A teaspoon of baking soda, for the cooking water
  • Fresh rosemary, thyme, and a few smashed garlic cloves, for the last 10 minutes
  • A heavy rimmed sheet pan or roasting pan, and a large colander
Wagyu Beef Tallow - Beck & Bulow

Shop This Recipe

The Fat Behind the Crunch

The secret to this crust is our Wagyu Beef Tallow, a stable, high-heat fat that melts into a golden pool and turns plain potatoes into something worth fighting over.

Shop Wagyu Beef Tallow →
  1. Heat the oven to 425°F, and put a heavy sheet pan on the lower rack to preheat.
  2. Peel the potatoes, and cut them into chunks about two inches wide, so they are large and even.
  3. Put the potatoes in a large pot, cover with cold water by an inch, and add a tablespoon of salt and the baking soda.
  4. Bring to a boil, then reduce to a steady simmer, and cook for 8 to 10 minutes, until the edges are soft and a knife slides into the outside of a chunk but the center still feels firm.
  5. Drain the potatoes in a colander, and let the steam escape for 3 to 4 minutes.
  6. Shake the colander firmly a few times, so the potatoes bump into each other and the surfaces turn fuzzy and rough. This is what creates the crisp crust.
  7. Take the hot pan out of the oven, add the tallow, and swirl it around until it melts and shimmers.
  8. Carefully tip the potatoes into the pan, turn them once to coat them in the fat, spread them in a single layer, and sprinkle with salt.
  9. Roast for 25 minutes, then turn the potatoes with a spatula, and roast for another 15 to 20 minutes, until deeply golden brown and crisp on all sides.
  10. Add the rosemary, thyme, and garlic for the last 10 minutes. Finish with a sprinkle of flaky salt, and serve right away.

Also Read: Char Siu Pork Belly: Sticky, Sweet Chinese BBQ Pork at Home

Why Parboil Potatoes Before Roasting?

Because it gives you two textures. Parboiling cooks the inside of the potato until it is soft and fluffy, and it gelatinizes the starch on the surface. When you drain and shake the potatoes, that starchy surface turns into a rough, pasty coating, which fries up in the hot fat into a thick, craggy crust. A potato that goes straight into the oven has a smooth surface and a thin skin, and it turns out dense and only lightly crisp. The few minutes spent boiling are the difference between an ordinary roast potato and an extraordinary one.

Why Add Baking Soda to the Water?

Baking soda makes the water slightly alkaline, which helps the outside of the potato break down faster as it boils. The surface turns soft and mushy, which is what you want, because it creates a thick layer of starchy paste to catch the fat. The result is a deeper, crunchier crust with more surface area. Use just a teaspoon for a large pot, since too much can make the potatoes fall apart. If you do not have baking soda, the recipe still works, with a slightly lighter crust.

How Do You Get the Crispiest Roast Potatoes?

Five small habits add up. Cut the potatoes into large, uneven chunks, which gives more edges to crisp. Parboil them with a little baking soda, and rough them up in the colander. Preheat the pan and the fat, so the potatoes sizzle the moment they land. Spread them in a single layer with space between them, because crowded potatoes steam instead of crisping. And leave them alone for the first 25 minutes, so a crust can form before you turn them. Use a thin metal spatula to flip them, which lifts the crust without tearing it.

How Much Tallow Do You Need?

About 4 tablespoons for a large tray of potatoes, which is enough to coat each chunk and leave a thin layer of fat on the pan. Too little fat leaves the potatoes dry and pale, and too much makes them greasy. The fat should shimmer when the potatoes go in, and it should sizzle loudly. If the pan looks dry halfway through, add another spoonful. The potatoes will absorb some of it as they roast, and the rest crisps the outside.

What Flavors Go Well With Tallow Potatoes?

Savory, herbal flavors work best. Fresh rosemary and thyme are classic, and smashed garlic cloves added near the end perfume the fat without burning. A sprinkle of smoked paprika adds depth. Grated Parmesan for the last five minutes gives a salty, nutty crust. A squeeze of lemon and chopped parsley brighten the dish right before serving. Add delicate flavors at the end, because garlic and herbs burn if they roast the whole time.

Can You Make Roast Potatoes in an Instant Pot or Air Fryer?

The Instant Pot is not needed for this recipe, since parboiling on the stove takes only a few minutes, and a pressure cooker would turn the potatoes to mush and prevent the starchy surface from forming. An air fryer works for a smaller batch. Parboil and rough up the potatoes the same way, toss them with a couple of tablespoons of melted tallow, and air fry at 400°F for 20 to 25 minutes, shaking the basket halfway. For a full holiday tray, the oven is the right tool.

What Should You Serve With Crispy Roast Potatoes?

They are the perfect partner for almost any holiday main. Pile them next to a roast turkey, a glazed Hickory-Smoked Heritage Berkshire Ham, a prime rib, or a rack of lamb, and spoon gravy over them. Serve them with something green and bright, such as roasted Brussels sprouts or green beans with lemon, and a spoonful of horseradish cream or mustard on the side. A glass of dry red wine pairs well with the rich, beefy flavor.

Also Read: Cider Braised Pork Belly With Crackling Skin and Apple Glaze

What Are the Most Common Roast Potato Mistakes?

Skipping the Parboil

The potatoes turn out dense and pale. Boil them first, then rough them up.

Using a Cold Pan

The potatoes stick and absorb the fat. Preheat the pan and the tallow.

Crowding the Pan

They steam and turn soft. Use a large pan, or two, with space between the pieces.

Turning Too Early

The crust tears off. Wait 25 minutes before the first turn.

Adding Garlic Too Soon

It burns and turns bitter. Add garlic and herbs for the last 10 minutes.

Troubleshooting: What Went Wrong and How to Fix It

My Potatoes Were Soft, Not Crispy

The pan was crowded or the oven was too cool. Spread them out, use 425°F, and roast a few minutes longer.

My Potatoes Stuck to the Pan

The pan or fat was not hot enough. Preheat both, and wait for the crust to form before turning.

My Potatoes Were Greasy

There was too much fat, or the oven was too low. Use about 4 tablespoons, and make sure the oven is fully heated.

My Potatoes Fell Apart When Boiling

They boiled too long or too hard. Simmer gently, and drain when the outsides are soft and the centers are still firm.

My Garlic Burned

It went in too early. Add it for the last 10 minutes only.

Frequently Asked Questions

How do you make crispy roast potatoes in beef tallow?

Parboil large potato chunks with baking soda, rough them up in a colander, and roast them in hot melted tallow at 425°F for 40 to 50 minutes.

Why use beef tallow for roast potatoes?

It is a stable, high-heat fat that browns evenly and gives a deep, savory flavor and a thick, crunchy crust.

What temperature should I roast potatoes at?

425°F gives a crisp, golden crust and a fluffy center.

Do I need to peel the potatoes?

Peeling gives the crispiest, craggiest crust, though unpeeled Yukon Golds also work.

Can I use butter instead of tallow?

Butter can burn at this heat. Use tallow, or a high-heat fat like duck fat.

How many potatoes do I need per person?

About one medium potato per guest, with a little extra, since they go fast.

Where can I buy Wagyu beef tallow online?

You can order our Wagyu Beef Tallow online and have it shipped to your door.

Also Read: Copycat Raising Cane's Chicken Fingers: A Viral Recipe Idea

Ready to Make Crispy Roast Potatoes This Holiday Season?

If you want to buy Wagyu beef tallow online, we make it easy. You can order tallow online without a trip to a specialty butcher, and it ships right to your door, ready for your holiday table. Browse the full Wagyu beef collection to find the best place to buy Wagyu beef online for roasts, steaks, and more. For questions about how to make crispy roast potatoes in beef tallow or where to buy Wagyu beef tallow, call us at 800-674-8426.

Wagyu Beef Tallow - Beck & Bulow

A Side Dish Worth Pairing With a Main

Serve the potatoes beside our Hickory-Smoked Heritage Berkshire Ham, a bone-in, spiral-cut ham, slow-smoked over hickory and fully cooked, for a holiday table with easy carving and deep, smoky flavor.

Shop Wagyu Beef Tallow →